Description
Free ground shipping.
The Girodisc system is a direct replacement for the OEM disc on the 991 GT3 and GT3 RS with OEM iron rotors.
No modifications are necessary. Allows use of factory unmodified pads unlike most aftermarket solutions for this application.
The disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.
The central hat section of the rotor is made from U.S. sourced 6061-T6 aircraft specification aluminum.
The central hat section of the rotor is made from U.S. sourced 6061-T6 aircraft specification aluminum.
The disc is made from a proprietary cast iron, poured in the USA and machined in house at Girodisc.
The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.
The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to their own specification.
The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to their own specification.
Cadmium plated for long lasting corrosion resistance.
These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc.
The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors.
This float also allows the rotor to self center between the pads.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
Once the Girodisc system is in place, simply replace the cast iron rotor when needed.
FEATURES:
- Fits all Porsche 991.2 GT3 (2017+)
- Lighter than stock brakes
- Perfect solution for vehicles seeing track use - saving you from costly OE ceramic replacements
- Caliper spacers are included to accommodate the larger 380mm front rotors.
- Rear rotors are OEM size
- Direct factory replacement
- Improved braking performance
- Reduced unsprung weight
- Increased rotor life
- Greater cooling efficiency
- Retains factory e-brake
- Premium grade; made in U.S.A.
Note:
When converting from carbon ceramic brakes to GiroDisc iron rotors we STRONGLY recommend replacing all four rotors in order to maintain the factory brake bias and controlled braking in all driving conditions.