ST XTA Adjustable Coilovers 2016-23 Audi TT/TTS Quattro w/o Mag Ride

Free ground shipping.

 

This is a special order kit. Delivery time can be 2-4 weeks. 

 

Fits TT Quattro and TTS Quattro models. Does not fit factory magnetic ride suspension. 

 

See fitment guide below for all applications, special notes, and exact front and rear lowering ranges. 

 

 

ST suspension products are engineered and made by KW in Germany to satisfy stringent quality and performance standards.

 

ST XTA coilovers feature KW damping technology which allows the suspension to be made either stiffer or softer depending on the driving conditions.

 

This damping adjustment is made on the upper end of the chromed piston rod allowing the setup to be changed almost instantly.

 

If the rebound force is increased, your car will drive with more track stability and reduced body roll.

 

If rebound force is decreased, it will be more daily driver comfortable.

 

For increased performance, ST XTA coilovers feature an aluminum adjustable top mount allowing the camber and caster to be adjusted depending on your driving needs or vehicle setup.

 

Galvanized coilover bodies with an additional corrosion resistant coating give life long service and dependable performance in any conditions. 

 

Scaled camber adjustment is marked on the mounts for accurate changes. 

  

Lowering is within the TÜV-tested, safe adjustment range.

 

The best adjustable coilover kits for Audi TT Quattro are at MGC.

 

Images are example only and may not be the actual kit for your car. 

 

Installation instructions

 

Fitment Guide:

• 2016-2022 Audi TT Quattro Base L4.1984cc

  2016: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2017: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2018: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2019: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2020: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2021: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2022: Lowering Rate: F: 0.8-2.0" / R: 0.8-1.8" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424

• 2023 Audi TTS Quattro Base

  2023: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424

• 2016-2022 Audi TTS Quattro Base L4.1984cc

  2016: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2017: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2018: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2019: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2020: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2021: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424
  2022: Lowering Rate: F: 0.4-1.6" / R: 0.4-1.4" 71: Only for cars with clamp diameter of 54.6mm on the front axle 226: For vehicles equipped with electronic damper control, these must be shut down according to the instructions. Electronics kit for decommissioning KW No. 68510424